NOTE: There are many available fan hub configurations. Be sure to note the location, orientation, and mounting pattern of the hub prior to removal from…

These are various fan clutch types such as: • Air engaged • Air disengaged • Electric • Viscous • On-off. This procedure only applies to…

NOTE: Some applications do not have a cooling fan or the cooling fan is located elsewhere on the application. If equipped, remove the cooling fan.…

The belt tensioner winds in the direction that the spring tang is bent over the tensioner body. To loosen the tension on the belt, rotate…

General Information Due to the number of different engine mounting con figurations, the following procedure is written to be generic. Some of the ill ustrations…

General Information Due to the number of different engine mounting configurations, the following procedure is written to be generic. Some of the illustrations will not…

For front gear train engines, remove the mounting capscrews and the fan shroud support brackets.  

Drive belt incorrect or not routed correctly Verify the proper belt part number is installed. Verify the belt tensioner arm stops are in the proper…

Electronic fault codes active or high counts of inactive fault codes View and troubleshoot the fault codes with INSITETM electronic service tool. Refer to Section…

Electronic fault codes active or high counts of inactive fault codes View and troubleshoot the fault codes with INSITETM electronic service tool. Refer to the…