1. Ensure sealing surfaces on cylinder block and front cover are clean. Install NEW gaskets on front cover and apply        silicone sealant…

1. Manufacturer recommends removing engine to service front cover. Remove engine. See ENGINE. Remove water        pump. See WATER PUMP. Remove vibration damper…

1. If assembling valve lifter, coat all components with engine oil and reassemble. To install, reverse removal                 …

1. Ensure roller rotates smoothly and without excessive play. Inspect all components for damage. Ensure plunger            moves freely in plunger…

1. Remove appropriate cylinder head. See CYLINDER HEADS. 2. Remove retaining bolt and camshaft follower guide. See Fig. 115. 3. Mark valve lifter location for…

1. If assembling rocker arm assembly, place steel ball in cup area on rocker arm. Lubricate steel ball with engine oil.        Install…

1. Remove the valve cover. See VALVE COVERS. NOTE: Be careful when removing the rocker arm snap retaining clip. DO NOT lose the rocker arm…

1. Thoroughly clean the crankshaft front seal mounting surface. Coat the NEW crankshaft front seal with multi-              purpose grease.…

1. Remove the radiator. See RADIATOR. Raise and support the vehicle. Remove the flywheel housing cover                   …

1. Install the cylinder head gasket. Using the Cylinder Head Lifting Tool (303-D098, D94T-6000-B) and Heavy Duty      Floor Crane (014-00071), with an assistant,…