Visually inspect the water pump body for cracks, porosity, or excessive corrosion. NOTE: If the part being inspected does not meet the specification given or…

Use a gasket scraper to remove the gasket material from the gasket sealing surfaces. Use Scotch-Briteᮋ 7448, Part No. 3823258, to clean the bearing and…

Remove the pulley with puller, Part No. 3375257. Remove the impeller with puller, Part No. 3823040. Remove the retaining ring that holds the bearing assembly…

Visually inspect the water pump body for cracks or dam- age. Visually inspect the impeller for cracks, erosion, or damage. Visually inspect the pulley for…

Before cleaning the water pump, inspect the weephole for large amounts of chemical fallout. A small amount is normal, but rebuild or replace the pump…

After lubricating all pieces and the o-ring seal, install the poppet valve (4), spring (3), the plunger (2), and retaining plug (1) into the lubricating…

Lubricate new o-rings with vegetable oil, and install on the oil cooler core transfer tubes. Install the oil cooler core on the oil cooler transfer…

Install straight thread o-ring plugs. Torque Value: 35 N•m [25 ft-lb] Install Compuchekᮋ fittings. Torque Value: 14 N•m [10 ft-lb] Install the transfer housing support…

Use the valve spring tester, Part No. 3375182, to measure the spring force. Compress the spring to a height of 59.18 mm [2.330 inch]. The…