NOTE: The roller pin must be installed correctly to make sure the cam follower roller and the roller pin are supplied with oil. Inspect the…

Measure the inside diameter of the cam follower lever roller pin bore. Measure the inside diameter of the new cam follower lever roller bore. Measure…

Refer to the Alternate Repair Manual, Bulletin No. 3379035, for procedures to magnetically check for cracks in the cam follower levers.

Use a 240 grit, or finer, emery cloth to remove any burrs from the edges of the pin bore holes. NOTE: Do not burnish the…

Install the cam follower lever into a vise with brass jaws. The cam follower lever does not have a through hole in which to drive…

Use Lubriplateᮋ 105 or its equivalent to lubricate the bushingless cam followers and cam follower shafts. Install the levers and the shafts in the housings.…

Use a dial indicator to measure the cam follower to roller pin clearance. NOTE: If the roller to pin clearance is not within these specifications,…

Remove the two locking screws. NOTE: Each cam follower housing assembly consists of two shaft assemblies secured in a common center support with two locking…