Only remove the gear when the crankshaft or the gear is damaged. Use a puller jaw, Part No. 3375839, and gear puller assembly, Part No.…

Visually inspect the machined surfaces for scratches or nicks. Use a fine crocus cloth to remove the nicks and scratches. NOTE: If scratches or nicks…

NOTE: New crankshafts are coated with a heavy preservative. Use solvent to thoroughly remove the coating. Brush or flush the packing debris from the oil…

Caution: Always wear protective gloves when handling heated parts. Personal injury can result. Apply a spray of spot check developer, type SKD-NFா, or its equivalent,…

Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam can cause serious personal injury. Steam clean…

Visually inspect the pulley for cracks in mounting web and near the belt grooves, belt groove wear, or other damage. Measure the inside diameter.  

Warning: When performing the following procedures, wear eye protection. Also, the wire brush must be rated for the RPM being used if the brush is…

Visually inspect the adapter for cracks. Measure the inside pilot diameter. Measure the outside pilot diameter.

Warning: When performing the following procedures, wear eye protection. Also, the wire brush must be rated for the RPM being used if the brush is…

Visually inspect the bearings for damage. Replace any bearings with the following damage: • Pitting • Flaking • Corrosion • Lock tang damage • Scratches…