Caution: Do not use a scraper or a wire brush. The bearings can be damaged. Use solvent and a soft bristle brush. Dry with compressed…

Using a feeler gauge, check the clearance between the mandrel and the dial indicator holding plate as shown.  

Install the mandrel and the arbor into the connecting rod to be inspected. Install the connecting rod into the fixture. Measure the rod length and…

Use a connecting rod checking fixture, Part No. ST-561, and a connecting rod mandrel set, Part No. 3823785, to inspect the bend and the twist…

Caution: Do not use a hammer or damage to the dowel will result. Use a plastic mallet to install the ring dowel.

Caution: Do not damage the surface or the ring dowel hole during removal of the dowel. Use pliers or locking pliers to remove the damaged…

Visually inspect the connecting rod and the cap for fretting damage on the mating surfaces. The rod and the cap must be replaced as an…

NOTE: The alpha characters or numbers on the connecting rod cap must be the same as the alpha characters or numbers on the rod. Do…

Visually inspect the piston bowl, the pin bore, and the skirt for cracks or damage. Use crack detection kit, Part No. 3375432, or equivalent to…

Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot steam can cause serious personal injury. Caution: Do…