To remove the cup plug from the camshaft bore, use a center punch to mark the cup plug for drilling. Drill a 3.18 mm [1/8-inch]…

1. A WARNING statement is included for any component or assembly that weighs more than 23 kg [50 lb]. To avoid personal injury, use a…

Cover all engine openings to prevent dirt and debris from entering the engine.  

Apply a light film of clean 15W-40 oil to the coolant filter gasket sealing surface before installing the coolant filter. Install the filter as specified…

NOTE: The o-ring can stick on the filter head. Make sure it is removed before installing a new filter. Clean the oil filter head surface.…

Install the breather vent tube on the breather tube, and tighten the hose clamps. Torque Value: 4.5 N•m [40 in-lb] Install and tighten the tube…

Apply a film of high temperature anti-seize compound, Part No. 3823097, to the turbocharger mounting studs. Install a new mounting gasket, the turbocharger, and the…

Install two guide studs. Use an adhesive or heavy grease to hold the gaskets in place on the cylinder head. NOTE: The side of the…

Caution: Make sure to use the same thickness of starting motor spacer (if used) as the one removed to install the starting motor to prevent…