Install the same number and thickness of fan spacers as were removed during disassembly. Install the fan. Tighten the 3/8-inch capscrews or hexagon nuts. Torque…

Install new alternator belts on the pulleys. Use a pry bar between the engine and the alternator to tighten the alternator belt. Use belt tension…

Install the alternator, capscrew, washer, and nut to the alternator mounting bracket. Install the adjusting link and the mounting capscrews. NOTE: Do not tighten the…

Install the alternator mounting bracket. Tighten the mounting capscrews. Torque Value: 47 N•m [35 ft-lb]

Install two guide studs in the oil cooler support mounting holes in the cylinder block. Install a new oil cooler support gasket over the guide…

Install the coolant inlet transfer connection and a new gasket on the water pump. Tighten the capscrews. Torque Value: 47 N•m [35 ft-lb]  

Install new water header cover gaskets and the covers. Tighten the capscrews. Torque Value: 12 N•m [110 in-lb]  

Install the dipstick tube housing and a new gasket. Install the four capscrews, and tighten. Torque Value: 47 N•m [35 ft-lb] NOTE: Check the dipstick…

Use vegetable oil to lubricate the new o-rings. Do not soak the new o-rings in engine oil. Install the o-rings in the groove of the…

Use a lifting fixture, Part No. ST-125, and a hoist with a minimum lifting capacity of 4.5 M ton [5.0 tons] to lift the engine.…