1. Using EST, open the D_ContinuousMonitor.ssn. 2. To monitor signal voltage, run KOEO Continuous Monitor Test. 3. Monitor ICP signal voltage. Verify an active DTC…

The ICP sensor is supplied a 5 V reference signal at Pin 2 through valve cover gasket Pin B from ECM Pin X1–14. The ICP…

The function diagram for the ICP sensor includes the following: • ICP sensor • Electronic Control Module (ECM) • Injector Drive Module (IDM) • Fuel…

1. Using EST, open the D_ContinuousMonitor.ssn. 2. To monitor signal voltage, run KOEO Continuous Monitor Test. For help, see “Continuous Monitor Test” in     …

The IAT sensor is supplied with a 5 V reference signal at Pin 1 through 12–pin connector (Pin 5) from ECM Pin X1–7. The sensor…

The function diagram for the IAT sensor includes the following: • IAT sensor • Electronic Control Module (ECM) • Fuel injector • ENGINE lamp (amber)…