[1] – Park machine safely. [2] – Allow engine to cool. [3] – Loosen adjusting cap screw (A). [4] – Loosen alternator cap screws (B).…

[1] – Remove timing gear cover. (See Remove and Install Timing Gear Cover in this Group.) [2] – Remove the eight screws (A) from oil…

[1] – Remove timing gear cover. (See Remove and Install Timing Gear Cover in this Group.) [2] – Align all timing marks (A), (B), and…

[1] – Remove flywheel. (See Remove and Install Flywheel in this Group.) [2] – Remove mounting cap screws, and pry engine back plate from cylinder…

[1] – Remove engine. (See Remove Engine in this Group.) [2] – IMPORTANT: FLYWHEEL IS HEAVY! Do not remove flywheel mounting bolts unless flywheel is…

[1] – Clean and inspect all parts. Make sure that all gasket material has been removed from mating surfaces. [2] – Install upper main bearing…

[1] – Check crankshaft end play. (See Check Crankshaft End Play in this Group.) [2] – Remove flywheel. (See Remove and Install Flywheel in this…

[1] – Clean and inspect all parts. Make sure that all gasket material has been removed from mating surfaces. [2] – Install upper main bearing…

[1] – Check crankshaft end play. (See Check Crankshaft End Play in this Group.) [2] – Remove flywheel. (See Remove and Install Flywheel in this…

[1] – →NOTE: The cylinder block can be rebored to use oversize pistons and rings. Pistons and rings are available in 0.25 mm (0.010 in.)…