1. Remove the clip (4) and disconnect the cruise cable (1). 2. Disconnect the speed set rod and the cruise spring. 3. Remove the cruise…

1. Remove the rear tire L.H. and the fender L.H.. 2. Remove the speed control pedal (1). 3. Remove the grip (2) and the floor…

1. Remove the internal cir-clip (2). 2. Tap out the PTO shaft (6) to the front “A”. (When reassembling) • In the lock nut (1)…

1. Remove the bearing case (2) mounting screws. 2. Take out the PTO shaft (1) with bearing case.  

1. Remove the differential bearing case (1) mounting screws. 2. Remove the differential bearing case (1), noting the number of left and right shims. 3.…

1. Remove the clevis pin (1). 2. Draw out the differential lock fork shaft (2). 3. Take out the shift fork (3).  

1. Loosen the remove the brake case mounting screws and nut. 2. Separate the brake case, tapping the brake case lever lightly. (When reassembling) •…

1. Loosen and remove the rear axle case mounting screws and nuts. 2. Support the rear axle case (1) with the nylon lift strap and…

1. Remove the spacer mounting screws. 2. Separate the spacer (1) from the transmission case. 3. Remove the 16T gear shaft assembly (2). 4. remove…

1. Remove the coupling (1) and the PTO clutch cam (5). 2. Remove the screws (3) and pinion bearing holder assembly (4). 3. Remove the…