1. Remove the bearing case (2) mounting screws. 2. Take out the PTO shaft (1) with bearing case.
Category: KUBOTA
1. Remove the differential bearing case (1) mounting screws. 2. Remove the differential bearing case (1), noting the number of left and right shims. 3.…
1. Remove the pinion shaft (1) and PTO drive shaft assembly (8).
1. Remove the bearing (1) and (16) with bearing puller. 2. Remove the external cir-clip (2) and (15). 3. Remove the shift fork (12) and…
1. Tap out the spring pin (1). 2. Remove the guide plate (2). 3. Remove the lock nut (3) and lock bolt (4). 4. Remove…
1. Remove the clevis pin (1). 2. Draw out the differential lock fork shaft (2). 3. Take out the shift fork (3).
1. Remove the PTO shift rod and PTO shift fork. 2. Remove the bearing cover (1). 3. Remove the external cir-clip (2). 4. Tap out…
1. Remove the internal cir-clip (6). 2. Tap out the main shaft (4) to the rear. NOTE • When drawing out the main shaft, take…
1. Remove the screw (1) and take out the spring and ball. 2. Tap out the spring pin (2). 3. Draw out the fork rod…
1. Remove the main shaft case (1). 2. Remove the stopper plate (2). 3. Remove the bearing cover (3). (When reassembling) • Apply grease to…