1. Remove the port block mounting hex. head screws. 2. Pull and remove the port block (1) from clutch housing. (When reassembling) • Install port…

1. Remove the internal cir-clip (1). 2. Remove the holder (2), spring (3) and valve poppet (4). (When reassembling) • Apply hydrostatic transmission oil to…

1. Remove the plate mounting screws (3) and plate (2). 2. Remove the neutral holder mounting screw (1) and neutral holder (4). (When reassembling) •…

1. Remove the release fork mounting screws (2). 2. Draw out the clutch lever (3) to remove the release fork (1). 3. Remove the release…

1. Take out the differential side gear (2) and differential side gear washer (1). (When reassembling) • Check the thrust and bearing surface of both…

1. Draw out the differential pinion shaft 2 (5), and take out the differential pinion (3) and differential pinion washer        (4). 2.…

Differential Pinion and Differential Side Gear 1. Draw out the differential pinion shaft (2). 2. Take out the differential pinions (1), differential pinion washers (7)…

1. Remove the spiral bevel gear. (When reassembling) • Check the spiral bevel gear for wear or damage. If it is no longer serviceable, replace…

1. Secure the differential gear in a vise. 2. Remove the ball bearing with a puller. 3. Remove the differential lock shifter.  

1. Remove the internal cir-clip (2). 2. Tap out the PTO shaft (6) to the front “A”. (When reassembling) • In the lock nut (1)…