KUBOTA – L2501 – TRANSMISSION – DISASSEMBLING AND ASSEMBLING – PTO Bearing Case

1. Remove the bearing case (2) mounting screws.
2. Take out the PTO shaft (1) with bearing case.

KUBOTA - L2501 - TRANSMISSION - PREPARATION - Separating Clutch Housing Case from Transmission Case
1. Remove the clutch housing mounting screws. 2. Separate the clutch housing from the transmission…
KUBOTA - L2501 - TRANSMISSION - PTO SYSTEM - Structure
PTO is "ENGAGED" or "DISENGAGED" by operating the shift lever of the PTO shifter. The…
KUBOTA - L2501 - TRANSMISSION - PTO SYSTEM - Shift Linkage
The PTO shift lever (1) to the PTO shift fork (4) are connected by the…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Front Wheel Drive Case
1. Remove the front wheel drive case (1) and lever (2). (When reassembling) • Be…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - PTO Cable and Fender Support
1. Disconnect the PTO wire (1). 2. Remove the fender supports (2) and the fender…

Published by samuel