1. Check the clutch housing case and transmission case are securely mounted on the disassembling stands. 2. Remove the return pipe (1) and disconnect delivery…

1. Disconnect the ground cables (1) and remove the slow blow fuse box (2) and wiring (3) from the steering support        (4).…

1. Adjust the brake pedals play first. 2. Depress one of the brake pedals to make sure the cruise control is not released. Also depress…

1. Set the cruise control lever to fully forward. 2. Adjust the cruise control rod (1) so that trunnion shaft may maximum incline forward.  

1. Push the cruise control lever (1) into maximum tied position. After that pull it 50 mm (2.0 in.) back. 2. Measure the force needed…

1. Check to see that the threaded portion of wire (3) rear side is set at center position. If not, set by lock nuts (2).…

NOTE • Stop the engine when adjusting the pedal stroke. • Be sure to adjust the HST neutral position. 1. Adjust the height (B) and…

1. Disengage the front wheel drive lever. (Drive only rear wheels.) 2. Set the cruise control to “OFF” position. (HST pedal is neutral position.) 3.…

1. Remove the brake rod and the propeller shaft. 2. Remove the hex. socket head plug from P port (1). 3. Assemble long adaptor C…

1. Remove the brake rod and the propeller shaft. 2. Remove the hex. socket head plug from P1 or P2 port. (P2 is for forward…