1. Adjust (shorten) the turnbuckle H (3) so that the overlapping length becomes 1 to 5 mm (0.04 to 0.1 in.). (Reference) 2. Repeat shifting…
Category: KUBOTA
1. Shift the range gear shift level to N (Neutral) position on the H (High) speed side. Keeping the lever slightly being …
The shift lever (1) through the shift fork (3) are connected by shift cable (2), as shown in the figure above. When the shift lever…
PTO is “ENGAGED” or “DISENGAGED” by operating the shift lever of the PTO clutch (3). The power train from the clutch to PTO shaft is…
The shift lever (1) is connected directly to the shift fork (2). When the shift lever (1) is moved to the “A” side, the shift…
The links from the shift lever (1) to the shift fork (4) are connected as shown in the figure. When the shift lever (1) is…
The cruise control lever (7) and HST pedal are linked with the lever rod (8), cruise lever 1 (4), cruise lever 2 (6), cruise adjusting…
The speed control pedal (HST pedal) (1) and the holder (Trunnion) are linked with the pedal bracket and HST neutral rod (5). As the HST…
Front wheel drive section is located in the differential gear case. 2 wheel drive or 4 wheel drive is selected by operating the front wheel…
The range gear shift section is located in the mid case. It changes the speed to five position (L, N, M, N and H) by…