Caution: The water pump must have a dowel pin locating hole (1) and oil cooler return passage (2). Engine
damage will occur due to lack of coolant flow through the oil cooler if the passage is not present.
Install the water pump with a new gasket to the block using the six mounting capscrews. Tighten the capscrews
to the following torque values:
• Tighten to 15 N•m [10 ft-lb].
• Tighten to 30 N•m [20 ft-lb].
• Tighten to 47 N•m [35 ft-lb].
