Home » John Deere » 1025R » 1023E, 1025R and 1026R – Check Crankshaft End Play

1023E, 1025R and 1026R – Check Crankshaft End Play

[1] – Fasten dial indicator (A) to engine and position indicator tip on end of crankshaft (B).

[2] – Zero the dial indicator.

[3] –
IMPORTANT:
Do not use excessive force when moving crankshaft to avoid damaging bearings

Using a bar, gently pry the crankshaft as far forward as possible.

[4] – Check reading on dial indicator. If end play exceeds specification, replace thrust bearings.