KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – ENGINE STARTING AND STOPPING SYSTEM – Checking OPC System (Manual Transmission Type)

1. Sit on operator’s seat.
2. Set the parking brake and stop the engine.
3. Shift the range gear shift lever to “NEUTRAL” position.
4. Shift the PTO gear shift lever to “OFF” position.
5. Fully depress the clutch pedal.
6. Start the engine.
7. Engage the PTO gear shift lever.
8. Stand up. (Do not get off the machine.)
9. The engine must shut off after approximately 1 second.