KUBOTA – L2501 – TRANSMISSION – DISASSEMBLING AND ASSEMBLING – Case Relief Valve

1. Remove the internal cir-clip (1).
2. Remove the holder (2), spring (3) and valve poppet (4).
(When reassembling)
• Apply hydrostatic transmission oil to the poppet before reassembling.

KUBOTA - L2501 - TRANSMISSION - DISASSEMBLING AND ASSEMBLING - Mid Case
1. Tap out the spring pin (1). 2. Remove the guide plate (2). 3. Remove…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Separating Mid Case from Transmission Case
1. Place the disassembling stand under the transmission case. 2. Remove the mid case and…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Separating Transmission Case from Mid Case
1. Check the mid case and transmission case are securely mounted on the disassembling stands.…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Separating Clutch Housing Case from Transmission Case
1. Remove the clutch housing mounting screws. 2. Separate the clutch housing from the transmission…
KUBOTA - L2501 - TRANSMISSION - PREPARATION - Separating Clutch Housing Case from Transmission Case
1. Check the clutch housing case and transmission case are securely mounted on the disassembling…

Related Posts

Published by samuel