1. Apply sealant to the threads o f the oil pressure sensor. Refer to Sealers, Adhesives, and Lubricants for the correct part number.
2. Using J 41712 , install the oil pressure sensor (1).
Tighten: Tighten the sensor to 49 N.m (36 lb ft).
3. Connect the oil pressure sensor electrical connector.
4. Install the left wheelhouse inner panel. Refer to Front Wheelhouse Liner Replacement – Left Side (Chevrolet) or Front Wheelhouse Liner Replacement – Left Side (GMC ).
5. Check and add engine oil if necessary.
