Cummins ISX11.9 CM2250 – Service Manual 022-001   Service Tools

Used to measure exhaust restriction

This pressure gauge is used to measure intake manifold pressure turbocharger boost and fuel line restriction, if needed.

Used to regulate air pressure.

Used to identify leaks and clean the EGR cooler on ISX engines.

Used to measure the surface temperature of the exhaust components.

Used to pressure test and clean the EGR cooler on ISX engines.

Used to pressure test and clean the EGR cooler on ISX engines.

Used to install the exhaust manifold seal on ISX engines.

This fitting is inserted into the thermistor ports of the aftertreatment system in order to measure the pressure and pressure differences at various points in the aftertreatment system.

Used to replace the HEPA filter on diesel particulate filter cleaner, Part Number 4918840.

This machine is used with diesel particulate filter cleaner adapter kit, Part Number 4918893 or 4919182, to clean the diesel particulate filter once it is removed from the vehicle. (U.S.A. only. Not intended for use in Canada.)

Used to replace the vacuum filter on diesel particulate filter cleaner, Part Number 4918840.

Used to replace the canister filters on diesel particulate filter cleaner, Part Number 4918840. Two are required per machine.

Used to replace the water separator on diesel particulate filter cleaner, Part Number 4918840.

Used to replace the oil separator filter on diesel particulate filter cleaner, Part Number 4918840.

This machine is used with diesel particulate filter cleaner adapter kit, Part Number 4919172 or 4919182, to clean the diesel particulate filter once it is removed from the vehicle. (For use in the U.S.A. and Canada.)

Used to replace the canister filters on diesel particulate filter cleaner, Part Number 4919052. Two are required per machine.

Used to replace the HEPA filter on diesel particulate filter cleaner, Part Number 4919052.

Used with Diesel Particulate Filter Cleaner, Part Number 4919052, to adapt the diesel particulate filter to the cleaner. Software unlock card, Part Number 4919055, is included in this adapter kit to upload the required cleaning parameters.

Used with Diesel Particulate Filter Cleaner, Part Number 4919052 or 4918840, to adapt the diesel particulate filter to the cleaner.

Used to measure diesel exhaust fluid concentration level.

Contains a variety of caps to prevent contamination of vehicle air handling plumbing during service procedures.

Contains a variety of caps to prevent contamination of vehicle air handling plumbing during service procedures.

Used for plugging the diesel particulate filter (DPF) and diesel oxidation catalyst (DOC) temperature and pressure ports. Contains plug, Part Number 4919495, for delta temperature on DPF and DOC, Part Number M12X1.25-6H. Contains plug, Part Number 4919496, for delta pressure on DPF, Part Number M14X1.5-6H. Contains plug, Part Number 4919497, for delta pressure on DPF, Part Number M16X1.5-6H.

Used for testing the aftertreatment DEF dosing valve for proper operation.

Used for testing the aftertreatment fuel injector for proper operation.