• Secure the turbocharger actuator wiring away from hot and abrasive parts.
Related Posts
- 6.7L Cummins Air Intake System - Variable Geometry Turbocharger Actuator, Electric - Remove
Disconnect the wiring harness from the turbocharger actuator by sliding the locking tang to the…
- 6.7L Cummins Air Intake System - Variable Geometry Turbocharger Actuator, Electric - Calibrate
The turbocharger actuator must be calibrated to the turbocharger. This step must be performed to…
- 6.7L Cummins Engine Disassembly - Turbocharger
Remove the four turbocharger mounting nuts. Remove the turbocharger and gasket. Cover the turbocharger exhaust…
- 6.7L Cummins Air Intake System - Variable Geometry Turbocharger Actuator, Electric - Install
NOTE: Following these instructions in order is very important. • Continue through the entire turbocharger…
- Cummins 4BT - Turbocharger Wastegate Actuator
NOTE: The wastegate is set accurately from the factory. Adjustment is not necessary unless the…
