Install
Apply high-temperature anti-seize compound to the exhaust manifold capscrew threads.
Install the exhaust manifold, new gaskets, and spacers.
Follow the tightening sequence shown in the illustration.
NOTE: To aid in alignment of the exhaust manifold, two capscrew passages have a smaller diameter than the
other passages. The location of these varies with manifold configuration. The capscrews in the smaller passages can
be tightened first, with the remaining capscrews tightened in a sequence starting from the inside of the manifold and
working towards the outside.
Tighten the exhaust manifold mounting capscrews.
Torque Value: 43 N•m [ 32 ft-lb ]
Install new lockplates (if equipped).
