1. Fuel pump is located inside left-side frame rail. Open fuel filter/water separator drain valve to release fuel pressure. Disconnect negative battery cable(s). Raise and support vehicle.
2. Disconnect fuel pump electrical connector. Remove fuel line retaining clip and disconnect fuel line from fuel pump. Slide retaining clip up on quick connect fitting. Using Fuel Line Disconnect (T90T-9550-S) tool, remove fuel pump delivery line. Remove 2 fuel pump attaching bolts and remove fuel pump and mounting bracket.
3. Disconnect fuel pump wiring push pin. Remove pinch bolt from mounting bracket. Remove fuel pump from mounting bracket. To install reverse removal procedure. Install NEW retaining clip on fuel line-to-fuel pump connection. Install and tighten bolts to specification.
See TORQUE SPECIFICATIONS.
