Cummins N14 – Ambient Air Pressure Sensor – Installation

Install the sensor on the engine. Tighten the capscrews.
Torque Value: 30 N•m [22 ft-lb]
Push the connectors together until they lock.

Cummins N14 Boost Pressure Sensor Location and Installation
Install the sensor on the engine. Tighten the capscrews. Torque Value: 30 N•m [22 ft-lb]…
Cummins N14 - Intake Air Temperature Sensor - Installation
Install the sensor in the engine. Tighten the sensor. Torque Value: 35 N•m [25 ft-lb]…
Cummins N14 - Air Compressor - Installation
Install the splined coupling on the accessory drive. Make sure the gasket surfaces of the…
Cummins N14 - CELECT Boost Pressure Sensor - Removal
Remove the sensor mounting capscrews. Remove the sensor from the engine.
Cummins N14 - Viscosity Sensor - Installation
sensor. Install the two bracket capscrews and tighten. Torque Value: 27 N•m [20 ft-lb] Connect…

Published by samuel