Install Be sure to remove the shipping plugs from the oil cooler element. When installing a new lubricating oil cooler be sure to use the…

Install NOTE: If installing a new turbocharger, orient the compressor housing to the same position as the turbocharger that was removed. Orient the housing by…

Install Apply high-temperature anti-seize compound to the exhaust manifold capscrew threads. Install the exhaust manifold, new gaskets, and spacers. Follow the tightening sequence shown in…

Install Carefully put the cylinder head on the cylinder block, and seat it onto the dowels. Lubricate the threads and under the heads on the…

Install A new gasket must be installed. Do not reuse an old gasket. Install the head gasket.

For front gear train engines, apply a 2 mm [1/16 in] bead of sealant, Part Number 3164067, to the oil pan mounting surfaces at the…

NOTE: Take care to ensure the oil suction tube gasket openings align with both the oil suction tube and the block. Install the lubricating oil…

NOTE: The block stiffener plate must be installed so the center ribs are bent away from the block, to ensure proper clearance from the block…

NOTE: Align the vibration damper/crankshaft speed indicator ring assembly with the index pin located on the nose of the crankshaft. Lubricate the capscrews with clean…

Front Gear Train For front gear train engines, the crankshaft seal is installed with the front gear cover removed. The front crankshaft seal is installed…