Installation: Oil cooler • Clean the oil filter mounting surface of the oil cooler. • Apply a thin coat of engine oil on the oil…

Inspection: Oil cooler element • Plug the outlet of the oil cooler element and connect a hose to the engine oil inlet port. Then, immerse…

Removal: Oil filter

Inspection: Driven gear, drive gear and gear and case • Carry out the following inspection. Replace the oil pump if any defects are found. (1)…

Installation: Oil pan • Clean the sealant application surfaces of each part. • Apply a bead of sealant to each of the mating surfaces of…

• Perform the inspection on a flat surface. • Warm up the engine until the water temperature gauge points to the median. • Check the…