Tools marked with * are components of the timing chain tool set (MH063679). [Inspection] • Perform the following inspections. If there is any abnormality, replace…

• Valve clearance should be checked and adjusted as follows while the engine is still cold. [Inspection] • Remove the rocker cover. • Bring the…

•For the hybrid electric vehicle system, there are two methods of cranking the engine, a conventional method using the starter and a method using the…

10.1 Front oil seal • The front oil seal is fitted in the timing gear case, and prevents oil from leaking by contact of its…

9.1 Crankcase • The crankcase is a bi-block type consisting of an upper crankcase and a lower crankcase that are assembled to grip the crankshaft…

• The bearing is fitted into the flywheel and held in place by the washers. • The peripheral edge on one side of the ring…

•For selective fit of the pistons with the upper crankcase, match corresponding size marks on the pistons and upper crankcase. The size marks of the…

• The “F” mark indicates the assembly direction onto the piston and engine front side. • The color mark indicates the diameter class of the…

•Each timing gear has mating mark(s) “1” or “5” to ensure that it is engaged correctly with another gear during installation. 5.1 Idler gear •…