[1] – Press new bearing (A) into case and install retainer plate (B). [2] – Install four screws (C). [3] – Route stator leads (D)…

[1] – →NOTE: Clamp sheave in soft jaw vise and use an impact wrench to remove pulley nut. Do not overtighten vise. Remove sheave nut…

[1] – Park machine safely. [2] – Allow engine to cool. [3] – Disconnect electrical harness connectors from alternator. [4] – Loosen adjusting cap screw…

[1] – Disconnect negative (—) battey cable and then positive (+) battery cable. [2] – Remove tie wrap (A) from cable boot, slide boot back.…

[1] – Raise hood. [2] – Disconnect headlights from wiring harness. [3] – →NOTE: One headlight needs to be removed so there is clearance to…