[1] – Park machine safely. [2] – Loosen lock nuts (A) and lift cable out of bracket. [3] – Disconnect cable end (B). [4] –…
Category: John Deere
Park machine safely. (See procedure in Section 10, Group 05.) [2] – Remove hood. [3] – Remove four mounting nuts (A). [4] – Remove exhaust…
[1] – Park machine safely [2] – Check fuel hoses for damage or deterioration. Replace hoses as necessary. [3] – →NOTE: Leave enough room to…
[1] – →NOTE: This procedure does not require removing the filter and water separator base or fuel hoses. Remove the retaining ring (G) from the…
[1] – Park machine safely [2] – Allow engine to cool. [3] – Turn fuel shutoff valve (A) to off position. [4] – Remove lower…
[1] – Park machine safely. [2] – Allow engine to cool. [3] – Turn the fuel shutoff valve on the fuel filter and water separator…
[1] – Apply John Deere form-in-place gasket to injection pump mating surfaces. [2] – Install and tighten injector pump, aligning the timing mark to the…
[1] – Park machine safely. [2] – Allow engine to cool. [3] – Turn the fuel shutoff valve on the fuel filter and water separator…
[1] – Install a new gasket (A) between injection pump and engine. Make sure oil hole (B) is correctly lined up with oil hole on…
[1] – Park machine safely. [2] – Allow engine to cool. [3] – Turn the fuel shutoff valve on the fuel filter and water separator…