1. Measure the differential side gear boss O.D.. 2. Measure the differential case bore I.D. and calculate the clearance. 3. If the clearance exceeds the…

1. Measure the pinion shaft O.D.. 2. Measure the differential pinion I.D. and calculate the clearance. 3. If the clearance exceeds the allowable limit, replace…

1. Measure the shaft O.D. at several points where it contacts with the bushings. 2. Measure the bushing I.D. in the same method, and calculate…

1. Measure the front axle middle boss O.D. at several points where it contacts with the bushing. 2. Measure the shaft bracket 1 bushing I.D.…

1. Remove ball bearing (2) and spiral bevel gear (1) as a unit with puller. 2. Remove the spring pin (4). 3. Pull out the…

1. Take out the differential yoke shaft (11), (12) both sides. 2. Remove the oil seal (6) and internal snap ring (5). 3. Remove the…

1. Remove the bearing with a special use puller set. 2. Take out the bevel gear (2). 3. Take out the collar (1). 4. Tap…

1. Remove the internal snap ring (1). 2. Take out the bevel gears (5), (7) with ball bearings (4), (6), collar (2) and shims (3).…

1. Remove the plug (4). 2. Remove the internal snap ring (3) and shim (2). 3. Remove the axle flange (1). 4. Tap out the…

1. Remove the bevel gear case mounting screws. 2. Remove the bevel gear case (3) and front gear case (4) as a unit from the…