1. Jack up the front side of tractor. 2. Set a dial gauge on the outside of rim. 3. Turn the wheel slowly and read…

1. Park the tractor on a flat place. 2. Inflate the tires to the specified pressure. 3. Turn steering wheel so front wheels are in…

Tightening torques of screws, bolts and nuts on the table below are especially specified.  

The front axle of the 4WD is constructed as shown above. Power is transmitted from the transmission through the propeller shaft (24) and to the…

The front axle of the 2WD is constructed as shown above. The shape of the front axle is relatively simple, and the front axle is…

1. Measure the plate thickness with vernier calipers. 2. If the measurement is less than the allowable limit, replace it.  

1. Measure the brake disc thickness with vernier calipers. 2. If the measurement is less than the allowable limit, replace it.  

1. Measure the dimensions of the brake cam plate with the ball installed. 2. If the measurement is less than the allowable limit, replace the…