KUBOTA – L2501 – ELECTRICAL SYSTEM – CHECKING AND ADJUSTING – ENGINE STARTING AND STOPPING SYSTEM – Range Gear Shift Lever Switch

1. Remove the safety leads.
2. Connect the circuit tester to the safety switch leads.
3. Measure the resistance between leads.
4. If the safety switch (1) is damaged, replace it.

KUBOTA - L2501 - ELECTRICAL SYSTEM - ENGINE STARTING SYSTEM - SAFETY SWITCH - Range Gear Shift Lever Switch
Range gear shift lever switch (1) is mounted on the switch stay under the guide.…
KUBOTA - L2501 - TRANSMISSION - SHIFT LINKAGE MECHANISM - Range Gear Shift Lever
The links from the shift lever (1) to the shift fork (2) and (3) are…
KUBOTA - L2501 - ELECTRICAL SYSTEM - ENGINE STARTING SYSTEM - SAFETY SWITCH - PTO Gear Shift Lever Switch
PTO gear shift lever switch (1) is mounted on the clutch housing case (3). When…
KUBOTA - L2501 - TRANSMISSION - SHIFT LINKAGE MECHANISM - Main Gear Shift Lever
The links are connected from the shift lever (4) to the shift forks (1), (2)…
KUBOTA - L2501 - TRANSMISSION - POWER TRAIN - Range Gear Shift Section
Besides three ways of power train from the counter drive shaft (1) to the spiral…

Related Posts

Published by samuel