Home » John Deere » 1025R » John Deere – 1023E, 1025R and 1026R – Remove and Install Fuel Filter Assembly

John Deere – 1023E, 1025R and 1026R – Remove and Install Fuel Filter Assembly

[1] – Park machine safely

[2] – Allow engine to cool.

[3] – Turn fuel shutoff valve (A) to off position.

[4] – Remove lower cowling for access to rear fittings.

[5] –
→NOTE:
When disconnecting hoses (B) from fuel filter assembly, be sure to cap hoses or catch draining fuel in a clean container.

Mark hoses (B) for proper reassembly and disconnect hoses after removing mounting cap screw and nut (C).

[6] – Remove fuel filter assembly.

[7] – Install new filter assembly in reverse order of removal.

[8] – Install lower cowling.