Home » 6.7L Cummins » 6.7L Cummins Cylinder Block – Gear Housing, Front – Remove

6.7L Cummins Cylinder Block – Gear Housing, Front – Remove

Remove the four front oil pan capscrews.

Remove the gear housing capscrews.
Note the location of the gear housing capscrews as they are removed. Some of the capscrews are an internal torx
fastener and must be installed in the same location as removed to maintain proper clearance.

Using a feeler gauge, separate the lubricating oil pan gasket from the gear housing.

Use a plastic hammer to loosen the front gear housing.
Remove the gear housing.