KUBOTA – L2501 – TRANSMISSION – SERVICING – Clearance between Shift Fork and Shift Gear Groove or Shifter GrooveClearance between Gear and Spline

1. Place for in the groove to check clearance with feeler gauge.
2. If the clearance exceeds allowable limit, replace.

KUBOTA - L2501 - TRANSMISSION - SERVICING - Clearance between Gear and Spline
1. Secure the gear with a vise. 2. Set a dial indicator (lever type) with…
KUBOTA - L2501 - ENGINE - Clearance between Piston Ring and Groove
1. Remove carbon from the ring grooves. 2. Measure the clearance between the ring and…
KUBOTA - L2501 - TRANSMISSION - SHIFT LINKAGE MECHANISM - Range Gear Shift Lever
The links from the shift lever (1) to the shift fork (2) and (3) are…
KUBOTA - L2501 - TRANSMISSION - SHIFT LINKAGE MECHANISM - Main Gear Shift Lever
The links are connected from the shift lever (4) to the shift forks (1), (2)…
KUBOTA - L2501 - ENGINE - Idle Gear Side Clearance
1. Set a dial indicator with its tip on the idle gear. 2. Measure the…

Published by samuel