Cummins ISX11.9 CM2250 – Service Manual 011-046   Aftertreatment Diesel Particulate Filter Differential Pressure Sensor Mounting Bracket

CAUTION  The catalyst elements contained in the aftertreatment system are made of brittle material. Do not drop or strike the side of the aftertreatment system, as damage to the catalyst element can result.

Due to the number of exhaust aftertreatment applications, this procedure is generic. Not all illustrations within the procedure will represent all applications.

The aftertreatment diesel particulate filter system is composed for three sections. These sections are:

1. Aftertreatment diesel oxidation catalyst
2. Aftertreatment diesel particulate filter
3. Outlet.

NOTE: In some applications, the catalyst can be integrated into the inlet of the exhaust aftertreatment.

NOTE: On some vertically oriented aftertreatment systems, the differential pressure sensor mounting bracket may be welded to the outlet section of the aftertreatment system. The outlet section of this type of aftertreatment system must be replaced if the differential pressure sensor mounting bracket is damaged.

WARNING  Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

CAUTION  The aftertreatment diesel particulate filter and catalyst can remain hot for long periods of time after the engine has stopped.

• Disconnect the batteries. Refer to the OEM service manual.
• Disconnect the aftertreatment wiring harness from the aftertreatment diesel particulate filter differential pressure sensor. Refer to Procedure 019-443 in Section 19.
• Remove the aftertreatment diesel particulate filter differential pressure sensor tubes. Refer to Procedure 011-047 in Section 11.
• Remove the aftertreatment diesel particulate filter differential pressure sensor. Refer to Procedure 019-376 in Section 19.
• Mark the orientation and location of the bracket before it is removed, to aid installation if there is not a locating tab present.

Remove the nut on the aftertreatment diesel particulate filter differential pressure sensor mounting bracket strap.

NOTE: Remove the differential pressure sensor mounting bracket and strap.

Inspect the differential pressure sensor mounting bracket for cracks, damaged threads, or broken studs.

Replace the differential pressure sensor mounting bracket if it is damaged.

Inspect the differential pressure sensor mounting bracket strap for cracks, damaged threads, or bends.

Replace the differential pressure sensor mounting bracket strap if it is damaged.

CAUTION  The aftertreatment system must be installed so the aftertreatment diesel particulate filter differential pressure sensor tubes slope downward to drain condensation away from the differential pressure sensor.

NOTE: Make sure the aftertreatment system is oriented so the aftertreatment diesel particulate filter differential pressure sensor is installed in the same orientation noted during disassembly.

Install the differential pressure sensor mounting bracket and strap. Be sure to align the cylindrical locating tab, if present, with the mounting bracket, as noted during removal.

If there is not a locating tab, use the reference mark that was made during removal.

Apply a coating of anti-seize compound to the threads of the aftertreatment diesel particulate filter differential pressure sensor mounting bracket strap.

Install the nut on the aftertreatment diesel particulate filter differential pressure sensor mounting bracket strap.

Tighten the differential pressure sensor mounting bracket strap.

WARNING  Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

• Install the aftertreatment diesel particulate filter differential pressure sensor. Refer to Procedure 019-376 in Section 19.
• Install the aftertreatment diesel particulate filter differential pressure sensor tubes. Refer to Procedure 011-047 in Section 11.
• Connect the aftertreatment wiring harness from the aftertreatment diesel particulate filter differential pressure sensor. Refer to Procedure 019-443 in Section 19.
• Connect the batteries. Refer to the OEM service manual.
• Operate the engine and check for proper operation.